Blog

Screwdriver

One Thing After Another, and Another Flat Tire

October 13, 2026•10 min read

One Thing After Another, and Another Flat Tire

Today started with what I thought would be a relatively simple project.

I decided to head over to one of the old outhouses and remove a DirecTV satellite dish that had been mounted there by the previous owners, or possibly one of their friends or family members who used to camp here.

I wasn't interested in the dish itself.

I wanted the mount.

Last week, I installed some equipment over at the main house as part of our security system. I had purchased a mount for some of the equipment, but it turned out it wasn't large enough to hold both pieces.

That left me with a few options.

Buy another mount.

Attach the equipment directly to the wall.

Or find something around the property that I could repurpose.

And then I remembered the old DirecTV dish.

So this morning, I loaded the ladder onto the tractor and headed over to the outhouse.

The dish was lag-bolted into the roof, but fortunately, the wood underneath was pretty much rotted out.

It actually pulled right off.

I brought everything back to the pavilion, disassembled the dish, and kept only the pieces I needed.

Then I headed over to the main house, installed the repurposed mount, and attached the equipment.

Another project completed using something we already had lying around.

I love when that happens.

While I was there, I decided to realign some of the other security equipment I installed last week.

That didn't go quite as smoothly.

I was having a lot of trouble getting the signal where I wanted it, and I couldn't figure out why.

Eventually, I realized the problem was probably related to reflections and all the rain we've had recently.

Until now, the equipment had been working pretty well, so I'm hoping once everything dries out, the signal will improve again.

I guess we'll see.

With that project more or less finished, I headed over to the Quonset hut.

I've been trying to get everything organized before we leave for the winter, and one of the things I wanted to tackle was the metal scrap that wouldn't fit into the dumpster.

I decided to start moving it behind the Quonset hut so I could clear out some space inside.

I don't think Travis is going to make it back here for a second load before I leave.

He offered to unload the dumpster at his house and then reload everything when he was ready to take it to the scrapyard.

But I really don't want him doing that.

There's a lot of little stuff mixed in with the scrap, and unloading and reloading it would make a huge mess of his property.

I'd much rather leave everything in the dumpster until he can empty it and bring back a fresh, clean container.

If that doesn't happen until spring, that's fine with me.

In the meantime, I managed to clean out quite a bit of the Quonset hut and start getting things organized.

There was also a pile of scrap wood, old furniture, and other miscellaneous wood that I'd been collecting inside.

So I started moving that over to the burn pile.

And that's when the tractor decided it had done enough work for the day.

I sprung a leak in one of the hydraulic lines.

Great.

Another repair.

Unable to continue, I headed back to camp.

We went into town and had some lunch before my partner headed back downstate to finish up work for the season.

After she left, I went over to Tractor Supply to find a replacement hydraulic hose.

I matched up the length and diameter, but the way the hoses were packaged made it difficult to see the fittings on the ends.

I figured I had the right one.

So I bought it and headed back to the farm.

Of course, once I got back and opened it, I discovered that my tractor needed female fittings on both ends.

The hose Tractor Supply sold had male fittings.

Naturally.

So back to Tractor Supply I went to return it.

Then I headed over to NAPA Auto Parts, where they made a new hydraulic hose for me with the correct fittings.

And if you know anything about having something custom-made, you probably know where this is going.

The $20 hose at Tractor Supply became a $100 hose at NAPA.

All because I needed different ends.

But at least I had the right hose, and I could get the tractor back to work.

Or so I thought.

On my way back from my second trip into town, I was about five minutes from camp when I heard a strange noise coming from the road.

I looked in my rearview mirror.

Didn't see anything.

So I kept driving.

When I got back to camp, I installed the new hydraulic line on the tractor.

Then, just as I was getting ready to head back over to the Quonset hut and continue working, I started walking toward the camper to grab something.

That's when I heard it.

A hissing noise.

Coming from my truck.

Yep.

A flat tire.

Or at least a tire that was quickly becoming flat.

Luckily, about two or three weeks ago, I purchased a new tire plug kit to keep here at the farm.

I figured I'd eventually need it for the tractor, so I bought a kit with extra plugs.

Apparently, the truck decided it needed it first.

I grabbed a pair of pliers and started pulling out what I thought was a screw stuck in the tire.

I pulled.

And pulled.

And pulled.

And the thing just kept getting longer.

Before I knew it, I had pulled an entire screwdriver out of my tire.

An actual screwdriver.

How does that even happen?

At this point, I was getting a little exhausted.

But I wasn't going to let a screwdriver stop me.

I opened the brand-new tire plug kit.

And for the first time in my entire life, I discovered that the kit didn't include a little tube of rubber cement.

I can't remember ever buying a tire repair kit that didn't come with one.

I went through my toolbox.

I searched the truck.

I usually keep another tire repair kit in there, but apparently not this time.

No rubber cement anywhere.

So I decided to try installing the plug anyway.

I wasn't particularly confident it would seal, but I figured it was worth trying.

I installed the plug, inflated the tire with my portable tire inflator, and then used the soapy-water trick to check for leaks.

Unfortunately, this time there were bubbles.

The plug wasn't sealing properly.

At this point, I really didn't have many options.

I didn't have any rubber cement, and I was too exhausted to feel like changing the tire and putting the spare on.

So I decided to inflate it to the proper pressure and see how quickly it lost air.

While I was waiting, I figured I might as well get something else done.

Yesterday, we planted our new orchard and purchased some mulch to put around the trees.

The mulch was still sitting in the back of the truck, so I unloaded it and headed over to the orchard.

I had heard that putting mulch around the base of newly planted trees can help insulate the roots and protect them from the cold winter weather that's coming.

So I spread a mound of mulch around each tree.

I'm hoping it'll give them a little extra protection through their first winter here at Memory Lane.

Another project crossed off the list.

Even with a leaking truck tire, I apparently can't just sit around and do nothing.

When I checked the tire again after about 30 minutes, it had lost approximately four pounds of air.

Not great.

I have an appointment at the tire shop tomorrow morning at 8:15.

I'm hoping they can properly repair the tire.

If they can't, I guess it'll be time for a new one.

I have my portable inflator, but I'll need to make sure the tire is safe enough to get there. Otherwise, I'll have to put the spare on.

And just to put things into perspective...

A little over two weeks ago, the dealer supposedly repaired the right front tire on my tractor.

That tire went flat again.

I had a new tube installed.

Today, I blew a hydraulic hose on the tractor.

And then I managed to pick up an entire screwdriver in my truck tire.

I'm starting to think the equipment around here is conspiring against me.

But even after all of that, I wasn't finished.

We're leaving in about two weeks, and there are still so many things I want to get done.

So I headed over to the main house, picked up my compound miter saw, and brought it back to the pavilion.

I decided to start cutting the cedar boards for the flower boxes.

I've had bulbs waiting to be planted, and I'm getting concerned about leaving them out of the ground much longer.

I really want to get these boxes built and the bulbs planted before we leave.

I managed to cut enough wood for about one and a half boxes.

I still have plenty of cedar left.

I stopped there because I need to cut some trim pieces and the bottoms, and I want to make sure everything is laid out properly before I start assembling them.

I'm guessing I'll get back to that on Wednesday.

Tomorrow is going to be a big day.

We have a big surprise coming!

I'm not going to give that away just yet.

But between the tire shop, a trip to the bank, and getting back to the farm, I probably won't have much time to work on anything before it arrives.

Of course, knowing me, I'll probably find something to do while I'm waiting.

Maybe I'll cut some more cedar for the flower boxes.

Maybe I'll work on organizing the Quonset hut.

Maybe I'll find something else entirely.

What I can guarantee is that I won't be doing nothing.

I simply don't have the luxury right now.

With only about two weeks left before we leave for the winter, I'm starting to feel the pressure of everything that still needs to be done.

The flower boxes are actually one of my top priorities right now.

Believe it or not.

I also need to finish organizing the Quonset hut so I can start moving things inside that can safely stay outdoors through the winter, as long as they're under cover.

Then there's the workshop.

Originally, I planned to load it up with equipment and supplies for winter storage.

But now I'm reconsidering that.

I'm thinking it might be better to leave the workshop relatively empty in case I need to come back and do some work during the winter.

At least I'd have somewhere to work that's somewhat protected from the wind and weather.

Everything else that needs to be stored safely and securely will have to go into the barn.

Which means I still need to finish cleaning and organizing the barn.

And then there are two other major projects that really need to get done.

We need to finish installing the garage door.

And we need to put plastic down over the slab underneath the bunkhouse to help address the moisture problem.

At this point, I'm not 100% sure I'm going to get to everything.

But I'm going to do my best.

It's funny.

I started today thinking I was going to repurpose an old satellite dish mount and organize some scrap metal.

Instead, I installed the mount, worked on the security system, cleaned part of the Quonset hut, blew a hydraulic hose, made multiple trips into town, discovered a screwdriver buried in my truck tire, mulched the new orchard, and still managed to start cutting wood for the flower boxes.

And tomorrow?

Well, tomorrow we have a surprise coming.

Hopefully, it doesn't involve another flat tire.

~ Making Memories

Memory Lane ProjectCatskills property restorationUpstate New York homesteadNew Holland tractor hydraulic repairTractor hydraulic hose replacementTruck tire puncture repairOrchard winter preparationMulching fruit trees for winterDIY farm projects
blog author image

Joshua Farber

Resident jack of all trades master of none

Back to Blog

Let's Connect

Quick Links

Support

Legal

Follow Us

Copyright 2026. The Memory Lane Project.
All Rights Reserved.